Sensors-pressure switches PROMA DRDM-5, RD-16, etc.

Mechanical pressure switch sensors are designed for installation in automation systems of boiler units, gas-burning devices, ventilation installations and air conditioning installations. The gas pressure sensor monitors the change in the set parameter. When it reaches the programmed value, the sensor gives a signal about switching, switching off or switching on the electrical circuit. You can set the desired pressure level by means of a special adjustment limb, which is equipped with an informative scale.
Models: DRDM-0.5-DI, DRDM-1-DI, DRDM-5-DI, DRDM-15-DI, DRDM-40-DI.

• DRDM. Passport.

---

Electronic pressure switch sensors are designed to indicate and switch electrical circuits when the actual value of excess, vacuum pressure, pressure drop (model DRDE-xx-DD), pressure-vacuum (pressure gauge model DRDE-xx-DIV), beyond the range set by two independent setpoints.
Models: DRDE-0.25-DD; DRDE-0.5-DD; DRDE-2.5-DD; DRDE-10-DD; DRDE-50-DD; DRDE-100-DD; DRDE-0.125-DIV; DRDE-0.25-DIV.

• DRDE. Operation manual.

---

The RD-016 pressure switch is used in ventilation, heat and power engineering, public utilities, water supply and sanitation. For indication of the current value and switching of electrical circuits when the actual pressure value goes beyond the range set by two independent setpoints. The power supply of the device is ~220V or =24V.

• Pressure switch RD-016. Operation manual.

---

The DRDM-600-DI pressure switch sensor is designed for regulation, current monitoring and alarm signaling in industry.

• DRDM-600-DI. Passport.

---